Cisco TelePresence System Codec C40 Manual de usuario descargar pdf (Pagina 15)

Cisco TelePresence System Codec C40 Physical interface guide

D14646.02 Codec C40 Physical Interface Guide TC4.0, November 2010.

ww w.cisco.com

Audio outputs

Line Out 1–2 (RCA)

2 x RCA sockets, audio output 1–2

Can be configured as two stereo pairs.

Main connector: Line Out 1 (left) and Line Out 2 (right)

are the main connectors to the local loudspeaker

system.

The local loudspeaker system may or may not include

the DNAM (Digital Natural Audio Module).

Default configuration: Line Out 1–2. In default

configuration, Line Out 1 and 2 are configured as

stereo speakers.

if a DNAM is present or SPDIF* is active on Line Out

1, then Line Out 1 provides a digital stereo speaker

signal and Line Out 2 is not active.

RCApin–out

External view of socket

RCA—Phono Plug (the Radio Corporation of

America)

WhatisaLineoutput

A Line output consists of all signals from

the local side and all signals from the far

end side.

WhatisaSpeakeroutput

A Speaker output consists of all signals

from the local side, except microphones,

and all signals from the far end side.

Leftchannel

The Left channel consists of all the Left

channel and Mono signals.

Rightchannel

The Right channel consists of all the Right

channel and Mono signals.

2 x Line Out

GNDSignal

*SPDIF—Sony/Philips Digital Interface, used by the Digital Natural

Audio Module.

Contents

Introduction

The physical interface

Connecting to the codec

The physical interface

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21

Comentarios a estos manuales

Sin comentarios

Cisco TelePresence System Codec C40 Manual de usuario Pagina 15

Comentarios a estos manuales