Cisco WBPN Guía de usuario descargar pdf (Pagina 31)

Using the WBPN Wireless-N Bridge for Phone Adapters Configuration Utility

Performing Administrative Tasks

Cisco WBPN User Guide 31

Upgrading Firmware

STEP 1 From the Navigation Menu, choose Administration > Upgrade Firmware.

STEP 2 Click Browse and navigate to the firmware file. Select the file.

STEP 3 Click Apply. The upgrade takes several minutes; do not power off the WBPN

during the upgrade.

Saving and Reloading Your Configuration

To save your current configuration (for example, wireless device information such

as SSID, security, and password):

STEP 1 From the Navigation Menu, choose Administration > Save/Reload Configuration.

STEP 2 Under

Save Settings to File

, click Save and choose to save the file to your PC. The

configuration is saved as a .dat file.

To load a previously saved configuration:

STEP 1 From the Navigation Menu, choose Administration > Save/Reload Configuration.

STEP 2 Under

Load Settings from File

, click Browse and locate the saved configuration file

that you want to restore.

STEP 3 Click Apply.

Changing Your Username or Password

To change your username or password:

STEP 1 From the Navigation Menu, choose Administration > Change Password.

STEP 2 Enter the new username and/or password. Enter the new password again to

confirm. The default username and password (cisco) is not allowed. Passwords

must be a minimum of one character and a maximum of 30 characters.

1 2 ... 26 27 28 29 30 31 32 33

Sin comentarios

Cisco WBPN Guía de usuario Pagina 31