Cisco MGBSX1 Guía de usuario descargar pdf (Pagina 4)

4. Now the fiber is connected to the

Gigabit SFP Module and should be

functioning. Connect the other end

of the cable to an SFP Module to

verify that the fiber connection is

complete.

5. Press the fiber cable’s connector

and pull to remove the fiber cable

from the Gigabit SFP Module.

6. To remove the Gigabit SFP Module,

begin by pulling the Module’s bail

latch.

7. Now, remove the Gigabit SFP Mod-

ule.

Figure 1-4: The connected fiber cable

Figure 1-5: Removing the fiber cable

Figure 1-6: Pull the bail latch

Figure 1-7: Remove the Module

1 2 3 4 5 6 7

Sin comentarios

Cisco MGBSX1 Guía de usuario Pagina 4