Cisco 1701 Manual de usuario descargar pdf (Pagina 9)

C-9

Cisco 1701 ADSL Security Access Router Hardware Installation Guide

OL-3954-02

Appendix C Installing and Upgrading Memory and Virtual Private Network Modules

Closing the Chassis

After installing memory or a VPN module on the motherboard, close the chassis

by following these steps:

Step 1 If you disconnected the fan from the motherboard as described in the “Opening

the Chassis” section, reconnect the fan cable to the connector labeled FAN on the

motherboard.

Step 2 Locate the posts that protrude from the inside of the chassis cover, and locate the

corresponding openings on the chassis bottom.

Step 3 Line up the posts with the corresponding openings, as shown in Figure C-8, and

carefully slide the posts into the openings, taking care not to damage the router

motherboard with the posts.

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Cisco 1701 Manual de usuario Pagina 9