Cisco WIRELESS ACCESS POINT WAP4410N Manual de usuario descargar pdf (Pagina 31)

Configuring the Cisco WAP4410N Wireless-N Access Point

Wireless

WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 31

Configuring WPA-Personal

Wi-Fi Protected Access (WPA) Personal (WPA-Personal) is a security standard

stronger than WEP encryption and forward compatible with IEEE 802.11e. WPA-

Personal is also known as WPA-PSK. To enable wireless WPA-Personal security,

follow these steps:

STEP 1 Click Wireless > Security.

STEP 2 From the Security Mode drop-down menu, select WPA-Personal.

STEP 3 To enable wireless isolation within the SSID, click Enabled.

STEP 4 Provide the following information:

• WPA Algorithms—WPA offers you two encryption methods, TKIP and AES

for data encryption. Select the type of algorithm you want to use, TKIP or

AES. The default is TKIP.

• Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.

• Key Renewal— Enter a key renewal timeout period, which instructs the

access point how often it should change the encryption keys. The default is

3600 seconds.

STEP 5 Click Save.

Configuring WPA2-Personal Security

This security mode supports the WPA2-Personal protocol. To enable wireless

WPA2-Personal security, follow these steps:

STEP 1 Click Wireless > Security.

STEP 2 From the Security Mode drop-down menu, select WPA2-Personal.

STEP 3 To enable wireless isolation within the SSID, click Enabled.

STEP 4 Provide the following information:

• WPA Algorithms—(Read-only) WPA2-Personal automatically chooses AES

for data encryption.

• Pre-Shared Key—Enter a WPA Shared Key of 8–63 characters.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Sin comentarios

Cisco WIRELESS ACCESS POINT WAP4410N Manual de usuario Pagina 31