Cisco PA-POS-2OC3 Manual de usuario descargar pdf (Pagina 6)

Figure 1-2 LEDs on the Cisco PA-POS-2OC-3 Port Adapter—Faceplate View Shown

Table 1-2 lists the LEDs colors, status, and function.

After system initialization, the ENABLED LED comes on to indicate that power is received and that the

Cisco PA-POS-2OC3 port adapter is enabled for operation.

The following conditions must all be met before the PA-POS-2OC3 is enabled:

• The Cisco PA-POS-2OC3 is correctly connected and receiving power.

• The host system software supports the PA-POS-2OC3.

If any one of these conditions is not met, or if the initialization fails, the ENABLED LED does not come

on.

84904

PA-POS-2OC3

ALARM

RCV

ALARM

ENABLED

RCV

TX TXRX

POS 1

POS 0

CLASS 1 LASER PRODUCT

LASERPRODUKT DER KLASSE

PRODUIT LASER DE CLASSE 1

PRODUCTO LASER CLASE 1

Table 1-2 Cisco PA-POS-2OC3 LEDs

LED Label Color State Function

ENABLED Green On Enabled for operation

ALARM Orange On There are SONET alarms on the interface

RCV Green On Receive signal is present (a cable is attached and the link

is up)

Green Blinking Packets are currently being received

1 2 3 4 5 6

Sin comentarios

Cisco PA-POS-2OC3 Manual de usuario Pagina 6