Cisco Network Switch Cabling Guía de usuario descargar pdf (Pagina 33)

HP Virtual Connect for Cisco Network Administrators (version 4.x)

Document Number: C01386629 Date: January 2014

page 33

 description FCoE uplink to FlexFabric

 channel-group 200 mode active

 lacp rate fast

 interface Ethernet1/6

 description FCoE uplink to FlexFabric

 channel-group 200 mode active

 lacp rate fast

Create the VLANs for the IP traffic:

 vlan 1,10,20

 Create a trunk on the port channel interface to pass the FCoE (VLAN 200) and Ethernet traffic (VLAN 1,10,20):

 interface port-channel 200

 switchport mode trunk

 switchport trunk allowed vlan 1,10,20,200

 spanning-tree port type edge trunk

Create a virtual Fibre Channel interface to carry the FCoE traffic through the port channel:

 interface vfc 2005

 bind interface port-channel 200

 no shutdown

Assign the vfc interface and the Fibre Channel port to the FCoE VSAN:

 vsan database

 vsan 200

 vsan 200 interface fc2/1

 vsan 200 interface vfc 2005

Configure the interface connected to the datacenter LAN:

 interface eth 1/17

 switchport mode trunk

 switchport trunk allowed vlan 1,10,20

Configuration of the zone:

Create zones:

 zone name fcoe-zone vsan 200

 member pwwn 21:53:00:02:ac:00:15:9d {This is the WWN of the first 3PAR controller port}

 member pwwn 50:06:0b:00:00:c3:1a:20 {This is the WWN of the Blade FlexFabric Adapter port

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Sin comentarios

Cisco Network Switch Cabling Guía de usuario Pagina 33