Cisco SF200-24P Manual descargar pdf (Pagina 9)

200 Series Smart Switches 9

Back Panel

The power port is located on the back panel of the smart switch.

Returning the Device to the Factory

Default Settings

To use the Reset button to reboot or reset the smart switch, do the

following:

•To reboot the smart switch, press the Reset button for less than 10

seconds.

• To restore the smart switch configuration to the factory default settings:

1. Disconnect the smart switch from the network or disable all DHCP

servers on your network.

2. With the power on, press and hold the Reset button for more than

10 seconds.

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Cisco SF200-24P Manual Pagina 9