Cisco Powerline AV Ethernet Adapter Guía de usuario descargar pdf (Pagina 10)

Chapter 3

Advanced Security

Powerline AV Network Adapter

On Adapter 1 or 2, press and hold the HomePlug Simple 3.

Connect button for two seconds. Then release the

button. The Power LED starts flashing.

After the Network Password is configured, Adapter 3 4.

will restart, and the Power and Powerline LEDs

light up.

(If the Powerline LEDs do not light up, try again; repeat

steps 1-3.)

Power, Ethernet, and Powerline LEDs are Lit

NOTE: The Powerline LED indicates that

the connection between Adapter 3 and your

powerline network has been established.

Repeat steps 1-4 to add additional Adapters, one at a 5.

time.

Congratulations! Security has been configured for the

additional Powerline AV Adapter(s).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Sin comentarios

Cisco Powerline AV Ethernet Adapter Guía de usuario Pagina 10