Cisco 1005 - 1005 Router Manual de usuario descargar pdf (Pagina 3)

Use the Correct Hardware and Software

Using the Cisco Web Browser FC-109

Control Access to the Cisco Web Browser Interface

To control which hosts can access the HTTP server used by the Cisco Web browser interface, use the

following command in global conﬁguration mode:

Specify the Method for User Authentication

To specify how HTTP server users are authenticated, use the following command in global

conﬁguration mode:

Use the Correct Hardware and Software

To use the Cisco Web browser interface, your computer must have a World Wide Web browser. The

Cisco Web browser interface works with most browsers, including Netscape Navigator. Your Web

browser must be able read and submit forms. The original versions of Mosaic might have problems

using the Cisco Web browser interface, because they either cannot submit forms or have difﬁculty

doing so.

The computer must be connected to the same network that the router or access server is on.

Access Your Router’s Home Page

Cisco IOS software allows users with a default privilege level of 15 to access a predeﬁned home page

for a router or access server. If you have been assigned a privilege level other than 15, Cisco IOS

Release 11.3 or later software allows you to issue Cisco IOS commands from a Web page where the

commands deﬁned for your speciﬁc user privilege level will be displayed.

To access the home page for your router or access server with a default privilege level of 15, perform

the following steps:

Step 1 Enter the following command in the URL ﬁeld of your Web browser and press return:

http://router-name/. (For example, to access a Cisco router named cacophony with a

default privilege level of 15, type http://cacophony/.)The browser then prompts you for

the password.

Step 2 Enter the password.

Note The name and password for your router and access server are designated in their

conﬁguration. Contact your network administrator if you do not have this information.

The browser should display the home page for your router or access server.

The router’s home page looks something like the Cisco 7200 home page shown in Figure 8.

Command Purpose

ip http access-class {access-list-number | name} Control access to the HTTP server used by the Cisco

Web browser interface.

Command Purpose

ip http authentication {aaa | enable | local |

tacacs}

Specify how HTTP server users are authenticated.

1 2 3 4 5 6 7 8 ... 15 16

Sin comentarios

Cisco 1005 - 1005 Router Manual de usuario Pagina 3