Cisco 1105 Manual de usuario descargar pdf (Pagina 6)

Prerequisites

Your VPN Gateway

‣

This guide applies to Cisco Small Business (formerly Linksys) WRV210 rout-

ers

‣

Make sure you have the latest firmware version installed that is available

for your device. This configuration guide was created using a Cisco WRV210

running firmware v2.0.0.11

Your Mac

VPN Tracker runs on Mac OS X 10.4, 10.5 and 10.6

The configuration described in this guide requires VPN Tracker 6. Make sure

you have all available updates installed. The latest VPN Tracker updates can

always be obtained from http://www.vpntracker.com

Scenario

In our example, we need to connect an employee's Mac to an office network.

The diagram on the bottom of this page illustrates this scenario.

This guide assumes that the Mac running VPN Tracker already has internet

connectivity. The office's Cisco VPN gateway device (the “VPN gateway”) is also

already connected to the Internet and can be accessed through a static IP ad-

dress or DNS host name. In our example setup, we will be using a static IP ad-

dress: 203.0.113.1.

The VPN gateway has a second network interface which is connected to the

internal office network (LAN). In our example, the office network is using the

network 192.168.13.0/24 (which is the same as 192.168.13.0/255.255.255.0). This

is the network that will be accessed from the employee’s Mac through the

VPN. It is called the “Remote Network” in VPN Tracker.

VPN Connection

Mac running

VPN Tracker

Office Network

192.168.13.0 / 255.255.255.0

Cisco WRV210

VPN Gateway

203.0.113.1

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Sin comentarios

Cisco 1105 Manual de usuario Pagina 6