Cisco 12012 Información técnica descargar pdf (Pagina 39)

show controllers (GRP image)

Cisco 12000 Series Gigabit Switch Routers 51

Command Mode

Privileged EXEC

Usage Guidelines

This command was added in Cisco IOS Release 11.2 GS to support the Cisco 12000 series Gigabit

Switch Routers.

Note This information is of use only to technical support representatives in analyzing system

failures in the ﬁeld. It is included here in case you need to read the displayed statistics to an engineer

over the phone.

Sample Display

The following example is sample output from the show controllers pos command for a

Cisco 12012.

Router# show controllers pos 7/0

POS7/0

SECTION

LOF = 2 LOS = 0 BIP(B1) = 5889

Active Alarms: None

LINE

AIS = 2 RDI = 2 FEBE = 146 BIP(B2) = 2106453

Active Alarms: None

PATH

AIS = 2 RDI = 4 FEBE = 63 BIP(B3) = 3216

LOP = 0 PSE = 8 NSE = 3 NEWPTR = 2

Active Alarms: None

APS

COAPS = 3 PSBF = 2

State: PSBF_state = False

Rx(K1/K2): F0/15 Tx(K1/K2): 00/00

S1S0 = 00, C2 = 64

PATH TRACE BUFFER : STABLE

Remote hostname : GSR-C

Remote interface: POS10/0

Remote IP addr : 10.201.101.2

Remote Rx(K1/K2): F0/15 Tx(K1/K2): 00/00

Router#

Related Commands

clear controllers

show controllers (line card image)

xbar (Optional) Displays the crossbar register information. The

XBAR is an ASIC that switches the data as it passes through the

switch fabric.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Sin comentarios

Cisco 12012 Información técnica Pagina 39