Cisco 1401 - 1401 Router - EN Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
Overview 1-13
Additional Required Equipment
Additional Required Equipment
Table 1-5 is a list of other equipment that you need to completely install your router.
Table 1-5 Additional Requird Equipment
Equipment When You Use It
10BaseT Ethernet hub or
10BaseT Ethernet switch
Hubs and switches connect multiple pieces of network equipment (including the
Cisco 1400 series router) to create a network.
You need either a hub or switch, not both, to connect your router to the LAN.
ATM-DSL modem
(Cisco 1401 router)
An ATM-DSL modem (for example, a Cisco 625 or Cisco 626) connects
ATM-based devices (such as the Cisco 1401 router) to ADSL lines.
Some DSL modems include an integrated POTS splitter, which connects the
router and a telephone or fax machine to the same ADSL line.
If you are not sure what type of DSL modem to use with your router, contact
your ADSL service provider or your Cisco reseller.
RJ-11-to-RJ-11 cable
(Cisco 1401 router only)
This cable connects a DSL modem (used with the Cisco 1401 router) to the
ADSL line. You might need to provide one if it is not included with the modem.
POTS splitter
(Cisco 1407 and
Cisco 1417 routers)
Optimal router and telephone performance (when the router and telephone are
used on the same telephone line) requires a POTS splitter. A splitter reduces
interference that might occur on data connections and voice calls. Some types of
splitters can be used to connect analog devices, such as a telephone or fax
machine, to the same ADSL line as the router. For more information, refer to the
“Using POTS Splitters and Microfilters” section in the “Installation” later in this
guide.
If you are not sure what type of splitter to use, contact your service provider or
your Cisco reseller.
Microfilter(s)
(Cisco 1407 and
Cisco 1417 routers)
Microfilters can be used (in addition to a POTS splitter) to further reduce
interference on a voice call. Refer to the “Using POTS Splitters and
Microfilters” section in the “Installation” later in this guide for detailed
information on when to use microfilters with the Cisco 1417 router.
If you are not sure what type of microfilter to use, contact your service provider
or your Cisco reseller.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios