Cisco 15216 EDFA2 Especificaciones descargar pdf (Pagina 30)

4-2

Cisco ONS 15216 EDFA Operation Guide

78-12818-01

Chapter 4 Provisioning and Monitoring

Local Serial Communication Setup

Figure 4-1 HyperTerminal Connect To Dialog Box

3 Open HyperTerminal.

4Type

Optical Amplifier, select an icon, and click OK.

In the Connect To dialog box (Figure 4-1), Direct to Com1 must be selected in the

Connect using field. Click OK when done.

5 Configure the Port Settings in the COM1 Properties dialog box as shown in

Figure 4-2.

6 From the HyperTerminal menu bar, select File>Properties to display the Properties

dialog box. Click the Connect to tab (Figure 4-3).

Make sure that Direct to Com1 is selected in the Connect using field.

7 Click the Settings tab shown in Figure 4-4 and click the ASCII Setup button.

Configure the ASCII Setup window as shown in Figure 4-5.

8Click OK to return to the HyperTerminal main screen.

9 Set the address using the !xx syntax, where xx can be any value from 00 to 99. At the

prompt, login using the @xx syntax, where xx can be any value from 00 to 99.

10 Click Enter once.

Table 4-2 RS-232 Configuration (continued)

Step Description

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 77 78

Sin comentarios

Cisco 15216 EDFA2 Especificaciones Pagina 30