Cisco 1605 - Router - EN Manual de usuario descargar pdf (Pagina 7)

Verify Your Installation.

After the router is powered on, the following LEDs conﬁrm that you have correctly installed your router.

For More Information

For more information about installing and conﬁguring your Cisco 1605 router, see the following documents:

• Cisco 1600 Fast Step Software Quick Start Guide that is in the accessory kit.

• Cisco 1600 Series Router Hardware Installation Guide that is in the accessory kit.

• Cisco 1600 Series Software Conﬁguration Guide that is in the accessory kit.

• The Cisco Connection Online card that is in the accessory kit, which lists telephone numbers, e-mail

addresses, and World Wide Web URLs for getting information directly from Cisco Systems.

LED Location What to Look For

SYSTEM PWR Front On means that power is being supplied to the router.

SYSTEM OK Front On means that the router software is loaded and functional. Blinking

means that the software is being loaded into router memory.

OK Rear, to the left of the

Flash PC card slot

On means that the Flash PC card is correctly installed. If the LED is off,

refer to the hardware installation guide that came with the router for

instructions on how to re-install the card.

LNK Rear, one next to each

10BaseT port

On means that the router is connected to a local Ethernet network

through this port. If you connected the router to a local network through

the AUI port, then the LNK LED next to the ETHERNET Ø 10BASET

should be off.

ETHØ ACT Front Blinking means that there is network trafﬁc on the local Ethernet network

that is connected to the ETHERNET Ø 10BASET port or the

ETHERNET Ø AUI port (only one of these two ports should be

connected).

ETH1 ACT Front Blinking means that there is network trafﬁc on the local Ethernet network

that is connected to the ETHERNET 1 10BASET port.

Any WAN

interface card

LEDs

WAN interface card

front panel

Refer to the documentation that came with the WAN interface card.

1 2 3 4 5 6 7 8

Sin comentarios

Cisco 1605 - Router - EN Manual de usuario Pagina 7