Cisco 1710 Información técnica descargar pdf (Pagina 16)

Installing and Upgrading Memory in Cisco 1700 Series Routers

OL-3892-02

Installing a Mini-Flash Module

You can install a mini-flash module (shown in Figure 9 below) in a Cisco 1720 or Cisco 1750 router to

increase the amount of router flash memory. (This section does not apply to Cisco 1721, Cisco 1751 or

Cisco 1760 routers.)

Figure 9 Mini-Flash Module

Take the following steps to install a mini-flash module on the motherboard:

Step 1 Locate the module slot on the motherboard, shown in Figure 4 on page 12 or Figure 6 on page 14.

Step 2 Hold the module with the notched edge away from you.

Step 3 Insert the module into the module slot at a 45-degree angle, as shown in Figure 10 below.

Step 4 Press down firmly on the module until you hear a clicking sound and the module is firmly inserted in the

slot.

Figure 10 Installing a Mini-Flash Module

Notched edge

12612

Mini-Flash module slot

45 degrees

12613

WAN interface card slot

Notched edge

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 25 26

Sin comentarios

Cisco 1710 Información técnica Pagina 16