Cisco 1751 Guía de instalación descargar pdf (Pagina 4)

Cisco 1751 Voice-over-IP Quick Start Guide

78-11259-04

Installing WAN and Voice Interface Cards

Figure 2 Inserting a WIC or VIC in the Router

If you need more detailed installation instructions, refer to the Cisco WAN Interface Cards Hardware

Installation Guide.

Connecting the FXS, FXO, and E&M VICs to the Network

If you installed FXS, FXO, or E&M VICs, use the following cables, and refer to Figure 3 to connect

them to the network:

• Standard RJ-11 modular telephone cable to connect FXS VIC ports (color-coded gray) to a

telephone or fax machine.

• Standard RJ-11 modular telephone cable to connect FXO VIC ports (color-coded pink) to the PSTN,

or to a PBX that does not support E&M signaling, through a telephone wall outlet.

• Standard RJ-48S connector and cable to connect E&M VIC ports (color-coded brown) to a PBX line.

The cable wiring depends on the type of connection. For details, refer to the Cisco WAN Interface

Cards Hardware Installation Guide.

46565

Interface card

+5, +12, -12 VDC

CONSOLE

AUX

Model Cisco 1750

10/100 ETHERNET

SEE MANUAL BEFORE INSTALLATION

VIC

2FXO

PVDM OK

MOD OK

SLOT 1

SLOT 2 OK

FDX

SLOT 0 OK

SLOT 1 OK

100

LINK

THIS SLOT

ACCEPTS

ONLY VOICE

INTERFACE

CARDS

SLOT 2

SLOT 0

IN USE

Guides

SEE MANUAL BEFORE INSTALLATION

VIC

2FXS

IN USE

1 2 3 4 5 6 7 8 9 ... 33 34

Comentarios a estos manuales

Sin comentarios

Cisco 1751 Guía de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 1751