Cisco 2524 - Router - EN Guía de usuario descargar pdf (Pagina 15)

Installing the Cisco 2524 and Cisco 2525 Routers 3-15

Connecting to the Network

You can connect the router to your Ethernet network in one of the following ways:

• Use an Ethernet AUI cable to connect the Ethernet AUI port to an Ethernet transceiver.

(See Figure 3-15.)

• Use a straight-through 10BaseT cable to connect the 10BaseT port to a 10BaseT hub.

(See Figure 3-16.)

• Use a crossover 10BaseT cable to connect the 10BaseT port to a PC network interface

card. (See Figure 3-17.)

Note If your Ethernet connection requires jackscrews, remove the slide-latch assembly

from the AUI connector and attach the jackscrews provided.

Figure 3-15 Connecting to an Ethernet Transceiver

SERIAL 1

SERIAL 0

BRI 0

H5368

Ethernet AUI port

DB-15 connector

(with jackscrews

or slide-latch)

Ethernet

AUI cable

(not supplied)

Router

Ethernet

transceiver

BNC connector

To thin

Ethernet

network

To thin

Ethernet

network

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

Sin comentarios

Cisco 2524 - Router - EN Guía de usuario Pagina 15