Cisco 3200 Series Especificaciones descargar pdf (Pagina 76)

6-16

Cisco 3200 Series Router Hardware Reference

OL-5816-10

Chapter 6 Wireless Mobile Interface Cards

Note By default, the C3205 WMIC performs automatic channel selection on the radio interface. For more

information about configuring a channel on the radio interface of the Cisco 3205 WMIC by using the

command-line interface (CLI), see the “Configuring the Radio Channel or Frequency for the C3205

WMIC” section in the Radio Channels and Transmit Frequencies document. To see Dynamic Frequency

Selection (DFS) statistics, use the show interface d0 dfs command.

Throughput

The throughput is a minimum of 16 Mbps half-duplex at one mile line-of-sight range for a

20-MHz-wide channel. The range performance is dependent on output power, antenna gain,

path loss, and other factors.

The following are range performance estimations:

• 6 Mbps at 10 kilometers (6 miles) at 30 dBm equivalent isotropically radiated power (EIRP)

• 1 Mbps at 30 kilometers (18 miles) at 30 dBm EIRP

Modulation

Table 6-11 lists the supported 5.0-GHz (802.11h) modulations and data rates.

Receive Sensitivity

Table 6-12 shows the receive sensitivity for 5.0-GHz (802.11h) radios.

Table 6-11 5.0-GHz (802.11h) Modulations and Data Rates

Modulation 20 Mbps

BPSK

6 Mbps and 9 Mbps

QPSK

12 Mbps and 18 Mbps

16 QAM

24 Mbps and 27 Mbps

64 QAM

48 Mbps and 54 Mbps

Table 6-12 Receive Sensitivity for 5.0-GHz (802.11h) Radios

Data Rates 5.25 GHz to 5.35 GHz 5.47 GHz to 5.725 GHz 5.725 GHz to 5.825 GHz

1. The 5.725-GHz to 5.825-GHz range is not supported on European models.

6 Mbps -85 dBm -85 dBm -85 dBm

9 Mbps -85 dBm -85 dBm -85 dBm

12 Mbps -85 dBm -85 dBm -85 dBm

18 Mbps -82 dBm -82 dBm -82 dBm

24 Mbps -79 dBm -79 dBm -79 dBm

36 Mbps -76 dBm -76 dBm -76 dBm

48 Mbps -71 dBm -71 dBm -71 dBm

54 Mbps -69 dBm -69 dBm -69 dBm

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 93 94

Sin comentarios

Cisco 3200 Series Especificaciones Pagina 76