
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 8
Product Specifications
Table 3 lists product specifications of the Cisco Catalyst 6900 Series 4-Port 40 Gigabit Ethernet Fiber Module.
Table 3. Product Specifications
Category Specifications
Standard protocols IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad,
IEEE 802.3ae, IEEE 802.3aq, and IEEE 802.3an
Physical specifications
●
Occupies one slot in the Cisco Catalyst 6500 E-Series chassis
●
Dimensions (H x W x D): 1.73 x 14.4 x 16 in. (4.4 x 35.6 x 40.6 cm)
●
Weight: 12 lb excluding CFP components; .25 lb for each CFP component
Environmental conditions Operating temperature:
●
Agency-certified for operation: 32 to 104°F (0 to 40° C)
●
Storage temperature: -40 to 167°F (-40 to 75°C)
●
Relative humidity: 10 to 90 percent, non condensing
Regulatory compliance Cisco Catalyst 6500 Series 10 Gigabit Ethernet Fiber Modules, when installed in a system, comply with the
following EMC and safety standards:
EMC standards:
●
FCC Part 15 (CFR 47) Class A
●
ICES-003 Class A
●
VCCI Class A
●
EN55022 Class A
●
EN55024
●
CISPR24
●
CISPR 22 Class A
●
AS/NZS CISPR 22 Class A
●
ETS 300 386
●
KN 22 Class A
●
EN61000-3-2
●
EN61000-3-3
●
CNS13438 Class A
Safety Standards:
●
UL 60950-1
●
CAN/CSA C22.2 No. 60950
●
EN 60950-1
●
IEC 60950-1
●
AS/NZS 60950-1
NEBS criteria levels SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
ETSI
●
ETS 300 019-2-1, Class 1.2 Storage
●
ETS 300 019-2-2, 2.3 Transportation
●
ETS 300 019-2-3, Class 3.2 Stationary Use
Network management
●
ETHERLIKE-MIB (RFC 1643)
●
IP-MIB and IP-FORWARD-MIB for IPv6
●
IF-MIB (RFC 1573)
●
Bridge MIB (RFC 1493)
●
CISCO-STACK-MIB
●
CISCO-VTP-MIB
●
CISCO-CDP-MIB
●
RMON MIB (RFC 1757)
●
CISCO-PAGP-MIB
●
CISCO-STP-EXTENSIONS-MIB
●
CISCO-VLAN-BRIDGE-MIB
●
CISCO-VLAN-MEMBERSHIP-MIB
●
ENTITY-MIB (RFC 2037)
●
HC-RMON
Comentarios a estos manuales