Cisco 605-RF - 605 - 7 Mbps DSL Modem Manual de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
32D-Link DIR-605L User Manual
Section 3 - Conguration
Firewall & DMZ
This section will allow you to set up a DMZ host and to set up rewall rules.
If you have a client PC that cannot run Internet applications properly from behind the DIR-605L, then you can set the client up
for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes.
Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may
expose your local network to a variety of security risks, so only use this option as a last resort.
Check this to enable SPI.
Check this box to enable DMZ.
Enter the IP address of the computer you would like
to open all ports to.
Choose a name for the rewall rule.
Select to Allow or Deny transport of the data packets
according to the criteria dened in the rule.
The Source/Destination is the TCP/UDP port on either
the LAN or WAN side.
Click Add New to access the Schedules window. See
Maintenance>Schedules for more information.
Enter a beginning and ending IP address.
Select the transport protocol that will be used for the
lter rule.
Enter the desired port range for the lter rule.
Enable DMZ Host:
DMZ IP Address:
Name:
Action:
Source/Dest:
Schedule:
IP Address:
Protocol:
Port Range:
Enable SPI:
DIR-605L
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 96 97

Comentarios a estos manuales

Sin comentarios