Cisco 7000 and 7507 Chassis CHAS-7507 Especificaciones descargar pdf (Pagina 15)

Cisco 7000 and Cisco 7507 Chassis Replacement Instructions 15

Replacing a Rack-Mounted Chassis

Caution If the existing chassis is installed in an enclosed rack, or if a power strip or other rack

ﬁxture blocks access to the power supply bays, you might have to remove the existing system with

the power supplies intact, and then install them in the replacement chassis before you install that

chassis in the rack. Ensure that you have sufﬁcient assistance to support the chassis and to prevent

the rack from tipping while you move the chassis into or out of the rack. A fully-conﬁgured chassis

weighs 145 pounds, and the rear of the chassis is heaviest.

Step 4 Remove all power supplies from the existing system and place them aside (leave the

processor modules installed in the chassis.) Refer to the section “Moving Power Supplies”

on page 21

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sin comentarios

Cisco 7000 and 7507 Chassis CHAS-7507 Especificaciones Pagina 15