Cisco 7100 Series Especificaciones descargar pdf (Pagina 94)

Step 3—Configuring Quality of Service

Cisco 7100 Series VPN Configuration Guide

4-22

Step 3—Conﬁguring Quality of Service

Cisco IOS QoS service models, features, and sample conﬁgurations are explained in detail

in the Quality of Service Solutions Conﬁguration Guide and the Quality of Service

Solutions Command Reference. Refer to these two publications as you plan and implement

a QoS strategy for your VPN, because there are various QoS service models and features

that you can implement on your VPN.

This section just contains basic steps to conﬁgure QoS weighted fair queuing (WFQ),

which applies priority (or weights) to identiﬁed trafﬁc, on the IPSec tunnel you conﬁgured

in the “Step 2—Conﬁguring Encryption and an IPSec Tunnel” section on page 4-9 and

includes the following tasks:

1 Conﬁguring Weighted Fair Queuing

2 Verifying Weighted Fair Queuing

Note For overview information on WFQ, see the “Step 2—Conﬁguring Quality of

Service” section on page 3-8.

Conﬁguring Weighted Fair Queuing

To conﬁgure fair queuing on an interface, complete the following steps starting in global

conﬁguration mode:

Step Command Purpose

hq-sanjose(config)# interface serial 2/0

Specify an interface and enter interface

conﬁguration mode. This example speciﬁes serial

interface 2/0 on the headquarters router.

hq-sanjose(config-if)# fair-queue

Conﬁgure fair queuing on the interface.

hq-sanjose(config-if)# exit

hq-sanjose(config)#

Exit back to global conﬁguration mode.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 111 112

Sin comentarios

Cisco 7100 Series Especificaciones Pagina 94