Cisco 7609 Especificaciones descargar pdf (Pagina 526)

100

101

36-2

Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E

78-14064-04

Chapter 36 Configuring SNMP IfIndex Persistence

Configuring SNMP IfIndex Persistence

Note To verify that ifIndex commands have been configured, use the more system:running-config command.

Enabling and Disabling SNMP IfIndex Persistence Globally

SNMP ifIndex persistence is disabled by default. To globally enableSNMP ifIndex persistence, perform

this task:

To globally disable SNMP ifIndex persistence after enabling it, perform this task:

Enabling and Disabling SNMP IfIndex Persistence on Specific Interfaces

To enable SNMP ifIndex persistence only on a specific interface, perform this task:

Note The no snmp ifindex persistence interface command cannot be used on subinterfaces. A command

applied to an interface is automatically applied to all the subinterfaces associated with that interface.

Command Purpose

Router(config)# snmp-server ifindex persist

Globally enables SNMP ifIndex persistence.

Command Purpose

Router(config)# no snmp-server ifindex persist

Globally disables SNMP ifIndex persistence.

Command Purpose

Step 1

Router(config)# interface {vlan vlan_ID} |

{type

slot/port} | {port-channel

port_channel_number}

1. type = any supported interface type.

Selects an interface to configure.

Step 2

Router(config-if)# snmp ifindex persist

Enables SNMP ifIndex persistence on the specified

interface.

Router(config-if)# no snmp ifindex persist

Disables SNMP ifIndex persistence on the specified

interface.

Step 3

Router(config-if)# exit

Exits interface configuration mode.

1 2 ... 521 522 523 524 525 526 527 528 529 530 531 ... 571 572

Comentarios a estos manuales

Sin comentarios

Cisco 7609 Especificaciones Pagina 526

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 7609