Cisco 820 Series Guía de instalación descargar pdf (Pagina 7)

1-7

Cisco 820 Series and SOHO Series Router Cabling and Setup

78-13937-04

Chapter 1 Cisco 820 Series and SOHO Series Routers Cabling and Setup

Connect a Digital Subscriber Line

Follow the steps in Figure 1-3 to connect an asymmetric digital subscriber line (ADSL) or G.SHDSL

line to the xDSL port on your router. Figure 1-3 shows back panels for ADSL and for G.SHDSL routers.

Refer to the back panel that is similar to the back panel of the router that you are installing.

Note The instructions in Figure 1-3 are for a straight-through ADSL cable, but they also apply if you are using

a crossover cable to connect your ADSL line. If you have microfilters or do not have the phone service

on the same line, use the lavender CAB-ADSL-RJ11 cable. If you have a splitter installed, use the

lavender CAB-ADSL-RJ11X cable with the blue stripe.

Figure 1-3 Connecting the Router to an xDSL Line

Connect a Cisco 827-4V Router to a Phone or Fax

If you have a Cisco 827-4V router, you can connect analog telephones or fax machines to your router.

Use the cables provided with these devices.

The gray PHONE 1, 2, 3, and 4 ports are RJ-11 connectors. If you are outside North America, you must

buy and attach adapters that allow telephones or faxes to be connected to the RJ-11 connectors. In some

countries, these adapters need additional electronics to convert the telephones or faxes to work properly

with the router phone ports. For example, in the United Kingdom, you must buy an adapter that also

provides a master socket, which causes incoming calls to ring the connected devices. For information on

recommended master sockets, see the Cisco 827 and SOHO 77 Routers Hardware Installation Guide.

Follow the steps in Figure 1-4 on page 1-8 to connect a telephone or a fax machine to a Cisco 827-4V

router.

ETHERNET 10BASE T

TO HUB

TO PC

43 2 1

Model Cisco 827 H

ADSL

CONSOLE

ETHERNET 10BASE T

TO HUB

TO PC

43 2 1

Model Cisco 828

G.SHDSL

CONSOLE

2. Connect other end of cable

to wall jack.

1. Connect lavender cable to

G.SHDSL port on router.

1. Connect lavender cable to

ADSL port on router.

Cisco 828 or

SOHO 78 router

Cisco 826, Cisco 827 series,

or SOHO 76 or 77 series router

74081

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios

Cisco 820 Series Guía de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco 820 Series