Cisco 820 Series Manual de usuario descargar pdf (Pagina 4)

Configuration Note for the Cisco SOHO 76 and 77 Routers

OL-2479-02

Command Reference

This section describes new commands that are supported on the SOHO 76, 77, and 77H routers.

show pppoe session Command

The show pppoe session command provides information about currently active PPPoE sessions. The

syntax of this command is shown below:

show pppoe session [ { all | packets }]

Syntax Description

Default

None.

Command Mode

This command is available in EXEC mode.

Command History

Example

The following example shows output for the show pppoe session command:

SOHO-02#show pppoe session

Total PPPoE sessions 3

PPPoE Session Information

UID SID RemMAC OIntf Intf Session

LocMAC VASt state

0 2 0004.4d10.04c1 Et0 Vi4 N/A

0004.27fc.dd50 UP

0 1 0004.4d10.04c1 Et0 Vi3 N/A

0004.27fc.dd50 UP

0 22 0005.019e.70a8 ATM0 Vi5 N/A

0004.27fc.dd50 VP/VC: 2/41 UP

SOHO-02#

clear pppoe Command

Use the clear pppoe command to terminate one or more PPPoE sessions that have been established by

PCs attached to the router. The syntax of this command is as follows:

clear pppoe { interface if-type if-number [ vc { [ vpi / vci ] vci | vc-name } ] |

rmac mac-addr [ sid session-id ] | all }

all Show detailed information about the PPPoE session.

packets Show packet statistics for the PPPoE session.

Release Modification

Cisco IOS Release 12.2(4)YG This command was introduced on the Cisco SOHO 76, 77, and 77H

routers.

1 2 3 4 5 6 7 8 9 ... 15 16

Sin comentarios

Cisco 820 Series Manual de usuario Pagina 4