
WAN Failover: Cisco 881 and AirLink ES440
6 4116261
The Create template window opens.
4. In the Application / Firmware window, select (or enter) ALEOS ES440
(4.3.6c.004)
5. Enter the following sample parameters, or values for your particular configu-
ration:
· WAN/Cellular > Reliable Static Route (RSR) > Reliable Static Route (RSR)
Primary Interface = Ethernet 1
Gateway for Primary Interface = 192.168.13.101
Backup Interface = Cellular
Destination IP/Network = 84.14.252.0
Destination Subnet Mask = 255.255.255.192
Tracking Object = Tracking Object 1
· WAN/Cellular > Reliable Static Route (RSR) > Tracking Object
Test IP Address = 8.8.8.8
Test Interface = Ethernet 1
Test Interval (seconds) = 20
Test Timeout (seconds) = 4
Maximum number of Test Retries = 2
Tracking Object = Enable
· WAN/Cellular > Reliable Static Route (RSR) > Reliable Static Route (RSR)
Reliable Static Routing = Enable
· LAN > Ethernet > General
DHCP Server Mode = 0
· LAN > Host Port Routing
Primary Gateway = enable
Comentarios a estos manuales