Cisco CTX2500 Información técnica descargar pdf (Pagina 17)

RTRV-COND-T1

Use the RTRV-COND-T1 command to retrieve all conditions on a specific DS1 port. The

RTRV-COND-T1 command is listed as RTRV-COND-<MOD2ALM> in the Cisco ONS SONET TL1

Command Guide. T1 is just one of the options you can enter. RTRV-COND-T1 is from the Fault

category.

Input Format:

RTRV-COND-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,];

• TID is the name of the node you want to access. If you only want to query the node you connected

to leave the TID blank.

• AID is the access identifier to indicate slot and port.

• CTAG is any non-blank character series that does not have to be unique.

• TYPEREQ is the type of condition to be retrieved. A null value is equivalent to ALL.

Input Example:

RTRV-COND-T1:TID:FAC-2-1:229::LOS;

Response Format:

SID DATE TIME

M CTAG COMPLD

“<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],[<OCRDAT>],

[<OCRTM>],,,[<DESC>]”

;

• AID shows the port in question.

• AIDTYPE shows the type of the port.

• NTFCNCDE is the 2-letter notification code. Values are CL (cleared), CR (critical), MJ (major),

MN (minor), NA (not alarmed), and NR (not reported).

• TYPEREP is the condition itself.

• SRVEFF is the effect on service caused by the alarm condition. Values are NSA (not service

affecting) or SA (service affecting).

• OCRDAT is a date and is optional.

• OCRTM is a time and is optional.

• DESC is a condition description.

Response Example:

TID-000 1998-06-20 14:30:00

M 001 COMPLD

“FAC-2-1,T1:CR,LOS,SA,01-01,16-00-20,,,\“LOS OF SIGNAL\””

;

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Sin comentarios

Cisco CTX2500 Información técnica Pagina 17