Cisco RPM-XF Especificaciones Pagina 82

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 688
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 81
2-26
Cisco ATM Services (AXSM) Configuration Guide and Command Reference for MGX Switches
Release 5.2, Part Number OL-6484-01 Rev. C0, September 2005
Chapter 2 Preparing AXSM Lines for Communication
General AXSM Provisioning Procedures
Step 7 To display the status of a path you have brought up, enter the dsppath command as follows:
M8950_DC.16.AXSMXG.a > dsppath 1.1.1
Path Number : 1.1.1 Path Type : sts
Payload : atm Width : 12
Admin Status : Up Alarm Status : Critical
Path Operational State : Down
Number of ports : 0 Number of partitions: 0
Number of SPVC : 0 Number of SPVP : 0
Number of SVC : 0
Xmt.Trace :
M8950_DC.16.AXSMXG.a >
When the path is up, the Admin Status row displays Up. The Payload row displays the payload type
(atm).
Step 8 Bring up and configure the rest of the paths shown in Step 5. Refer to the “Channelizing a Line” section
on page 2-18.
Vista de pagina 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 687 688

Comentarios a estos manuales

Sin comentarios