Cisco AS5300 - Universal Access Server Especificaciones descargar pdf (Pagina 19)

Configure E1 R2 Voice Ports

Voice over IP for the Cisco AS5300 19

Verify E1 R2 Signalling Conﬁguration

To verify the E1 R2 signalling conﬁguration:

• Type the show controller e1 command to view the status for all controllers, or type the show

controller e1 number command to view the status for a particular controller. Make sure the status

indicates the controller is up (line 2 in the following example) and no alarms (line 4 in the

following example) or errors (lines 9 and 10 in the following example) have been reported.

5300# show controller e1 0

E1 0 is up.

Applique type is Channelized E1 - balanced

No alarms detected.

Version info of Slot 0: HW: 2, Firmware: 4, PLD Rev: 2

Manufacture Cookie is not programmed.

Framing is CRC4, Line Code is HDB3, Clock Source is Line Primary.

Data in current interval (785 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

Total Data (last 13 15 minute intervals):

0 Line Code Violations, 0 Path Code Violations,

0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 12 Unavail Secs

• To check the robbed-bit signalling status of each channel, type the debug serial interface

command and the show controller e1 command.

as5300#debug serial interface

Serial network interface debugging is on

as5300#show controller e1 0

E1 0 is up.

Applique type is Channelized E1 - balanced

No alarms detected.

Version info of Slot 0: HW:2, Firmware:4, PLD Rev:0

Manufacture Cookie Info:

EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x43,

Board Hardware Version 1.0, Item Number 73-2218-4,

Board Revision A0, Serial Number 07805788,

PLD/ISP Version 0.0, Manufacture Date 19-Feb-1998.

Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line Primary.

Data in current interval (135 seconds elapsed):

0 Line Code Violations, 0 Path Code Violations

0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail

Secs

Robbed bit signals state:

timeslots rxA rxB rxC rxD txA txB txC txD

1 0 0 0 1 0 1 0 1

2 0 0 0 1 0 1 0 1

3 0 0 0 1 0 1 0 1

4 1 0 0 1 1 0 0 1

5 1 0 0 1 1 0 0 1

6 0 0 0 1 0 1 0 1

7 1 0 0 1 1 0 0 1

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Comentarios a estos manuales

Sin comentarios

Cisco AS5300 - Universal Access Server Especificaciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco AS5300 - Universal Access Server