
VIC2-2FXO
Two-port FXO Voice/Fax
Interface Card (universal
card for all countries)
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT Supports
battery reversal detection
and caller ID These Cisco
VICs can be software-
congured to work in all
countries Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only)
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
VIC2-4FXO
Four-port FXO Voice/Fax
Interface Card (universal
card for all countries)
Also Supports CAMA
(Centralized Automated
Message Accounting) on
Any Port
FXO ports are used to
connect to PBX or key
systems, or to provide
off-premise connections
to PSTN or PTT Supports
battery reversal detection
and caller ID These Cisco
VICs can be software-
congured to work in all
countries Also used to
connect to analog CAMA
trunk to provide dedicated
E-911 service (North
America only)
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
VIC2-2E/M
Two-port E&M Voice/
Fax Interface Card
Also Supports CAMA
(Centralized Automated
Message Accounting)
on Any Port
The two-port E&M voice
interface card for Cisco
voice/fax network modules
is used to connect to
PBX or key system trunk
lines This voice interface
card works with existing
phone and fax equipment
to provide voice and fax
services over IP, and is
compatible with H323
standard for audio- and
video conferencing
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
Analog Voice Interface Cards continued
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Voice Interface Cards
Analog Voice Interface Cards continued
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Voice Interface Cards
VIC-4FXS/DID
Four-port FXS Voice/Fax
Interface Card
FXS port is used to connect
directly to phones, fax
machines, and key systems
Generates battery polarity
reversal and caller ID
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
ISDN BRI Voice Interface Cards
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
VIC2-2BRI-NT/TE
Two-port BRI Voice/Fax
Interface Card
This two-port ISDN
terminal-side or
network-side Basic Rate
Interface (BRI) voice
interface card connects
directly to PSTNs and
PBX/PABXs and supports
both on-premise and
off-premise connections
Supports a total of four
voice channels in a single
interface card via two
RJ-45 physical ports, and
enables toll-bypass and
voice-over-packet features
Modular Router Solutions
Voice and Fax Integration
3800 Series–123(11)T
2800 Series–123(8)T4
When used in a Cisco 2800
or 3800 router, requires a
DSP module
123 Mainline and forward
supported in IP Voice
feature set
Comentarios a estos manuales