Cisco C85-SIMM-16MB - Upgrade From 8MB Especificaciones Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 267
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
System Overview
Samsung Electronics
Service Manual
3-11
3.2.5 Fixing Part (Fuser)
The fuser is consisted of the E-Coil, Heat Roller, Pressure Roller, Thermistor and Themostat.
It adheres the toner to the paper with pressure and a heat to complete the printing job.
3.2.5.1 E-Coil
Voltage 120V : 115 5%
220V : 230
5%
Capacity : 1100 Watt 25W
Temp. Distribution : 120%
3.2.5.2 Temperature-Interception Device (Thermostat)
Thermostat Type : Non-Contact type THERMOSTAT
Control Temperature : 70 5
THERMOSTAT-ROLLER Gap : 1.1 0.2mm
3.2.5.3 Temperature Detecting Sensor(Thermistor)
Thermistor Type : FS-50003 (SEMITEC 364FL Type)
Temperature Resistance : 7 (180 )
SYSTEM Temperature SETTING
- Stand by : 165
5
- Printing : 189 5 (5 minutes before)
184
5 (5 minutes after)
- Overshoot : 200
less
- Overheat : 210
less
3.2.5.4 Heat Roller
Length : 254mm
Valid length : 224mm
OD : 28.3 0.05(Coating incl., Crown 0.05~-0.15)
Material : AL(AL5052) + PFA Coating
Thickness : 0.9mm
Coating Material : PFA 100%
Coating Thickness : 20um (Thickness after abrasion)
GND Type : H/R Bearing Grounding type By SECC Fuser lower frame
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 266 267

Comentarios a estos manuales

Sin comentarios