Cisco CTX2500 Información técnica descargar pdf (Pagina 12)

ED-T1

Use the ED-T1 command edits the attributes related to a DS1/T1 port. ED-T1 is from the Ports

category.

Input Format:

ED-T1:[<TID>]:<AID>:<CTAG>:::[LINECDE=<LINECDE>],[FMT=<FMT>],[LBO=<LBO>],

[TACC=<TACC>],[TAPTYPE=<TAPTYPE>],[SOAK=<SOAK>],[SFBER=<SFBER>],

[SDBER=<SDBER>],[SYNCMSG=<SYNCMSG>],[SENDDUS=<SENDDUS>],

[RETIME=<RETIME>],[NAME=<NAME>],[MODE=<MODE>],[SYNCMAP=<SYNCMAP>],

[ADMSSM=<ADMSSM>],[VTMAP=<VTMAP>],[INHFELPBK=<INHFELPBK>],

[AISONLPBK=<AISONLPBK>],[CMDMDE=<CMDMDE>],[AISVONAIS=<AISVONAIS>],

[AISONLOF=<AISONLOF>]:[<PST>[,<SST>]];

• TID is the name of the node you want to access. If you only want to query the node you connected

to leave the TID blank.

• AID is the access identifier to indicate slot and port.

• CTAG is any non-blank character series that does not have to be unique.

• LINECDE is a line code. Values are AMI or B8ZS.

• FMT is a frame format. Values are D4, ESF, or unframed.

• LBO is a line build out. Values are 0-131, 132-262, 263-393, 394-524, or 525-655.

• TACC defines the STS as a test access port with a selected unique TAP number. The TAP number

is in the range of 0, 1–999. When TACC is 0 (zero), the TAP is deleted.

• TAPTYPE is the test access point type. Values are DUAL or SINGLE.

• SOAK is IS-AINS to IS transition soak time as measured in 15 minute intervals, so a value of 4

translates to a soak time of 1 hour. The allowable range is 0–192 intervals (maximum of 48 hours).

• SFBER identifies port SFBER; valid values are 1E-3, 1E-4 or 1E-5.

• SDBER identifies port SDBER; valid values are 1E-5, 1E-6,...1E-9.

• SYNCMSG is the synchronization status message. Values are NO or YES.

• SENDDUS is the synchronization status message Don’t use for Synchronization (DUS). Optional

for ONS 15454 and ONS 15310-CL/MA. Not supported on ONS 15327.

• RETIME indicates if retiming is needed. Values are NO or YES. Optional for ONS 15454 and

ONS 15310-CL/MA. Not supported on ONS 15327.

• NAME is the name. Maximum length is 32 characters.

• MODE type of DS1MODE.

• SYNCMAP is the synchronization mapping for the DS1 facility. Only supported on ONS 15454.

• ADMSSM is the administration synchronization status message. Only supported on ONS 15454.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Sin comentarios

Cisco CTX2500 Información técnica Pagina 12