Cisco Dial NMS Manual de usuario descargar pdf (Pagina 7)

Command Reference

Call Detail Records (CDR) MOD-7

show call history voice record

To display Call Detail Record (CDR) events in the call history table, use the show call history voice

records privileged EXEC command.

show call history voice record

Command Mode

Privileged EXEC.

Usage Guidelines

This command ﬁrst appeared in Cisco IOS Release 12.0(2)T.

Example

The following example displays a sample of voice call history records showing a local call between

two telephones attached to the same Cisco MC3810:

show call history voice record

ConnectionId=[0x2C7AEFDC 0x59830001 0x0 0xB0AAA3]

Media=TELE, TxDuration= 1418 ms

CallingNumber=2001

SetupTime=1157801 x 10ms

ConnectTime=1158046 x 10ms

DisconectTime=1158188 x 10ms

DisconnectText=local onhook

ConnectionId=[0x2C7AEFDC 0x59830001 0x0 0xB0AAA3]

Media=TELE, TxDuration= 1422 ms

CalledNumber=2002

SetupTime=1157802 x 10ms

ConnectTime=1158046 x 10ms

DisconectTime=1158188 x 10ms

DisconnectText=remote onhook

Table 1 explains the ﬁelds in the sample output.

Table 1 Show call history voice record Field Descriptions

Field Description

ConnectionID Global call identiﬁer for this voice call

Media Call over the type of media. If the call is over the (telephone) access side, the

entry will be TELE. If the call is over the voice network side, the entry will be

either ATM, FR (for Frame Relay), or HDLC.

LowerIFName Physical Lower interface information. Only displays if the Media is either

ATM, FR, or HDLC.

TxDuration The length of the call. Only displays if the Media is TELE.

CalledNumber The called number.

CallingNumber The calling number.

SetupTime Time the call setup started.

ConnectTime Time the call is connected.

DisconnectTime Time the call is disconnected.

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Cisco Dial NMS Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Dial NMS