Cisco H.323/SIP Información técnica descargar pdf (Pagina 25)

Direct Registration of Polycom RealPresence Systems with CUCM

Task 3: Creating a SIP Profile

CUCM associates specific SIP parameters with an endpoint or trunk via a SIP Profile. This step

will create a SIP profile in CUCM that can be associated with the Polycom system devices.

To create a SIP Profile:

1 Select Device > Device Settings > SIP Profile.

2 Click Find to see the list of existing SIP Profiles, and select the Standard SIP Profile (a

default in CUCM).

3 Once open, select Copy.

4 Change the Name to something meaningful for your deployment, and then ensure the

following is configured.

Note: Leaving SIP Settings as Default

Most of the SIP settings will likely be left at default; however the CUCM administrator

should be consulted for any SIP settings that may be specific to your deployment.

5 Change the Name to something meaningful for your deployment, and then ensure the

following is configured.

a Use Fully Qualified Domain Name in SIP Requests should be checked.

b Allow Presentation Sharing using BFCP should be checked.

c Early Offer support for voice and video calls should NOT be checked.

The data shown in this section is shown as an example.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 94 95

Sin comentarios

Cisco H.323/SIP Información técnica Pagina 25