Cisco PRP-1= Especificaciones descargar pdf (Pagina 27)

OL-17436-01

Checking the Installation

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS XR Software for the Cisco XR PRP, Version 3.8.0.15I

RP/0/2/CPU0:Sep 10 16:34:19.351: syslogd_helper: [84]: dsc_event_handler: Got SysMgr dSC

event : 1

Tip The LED message “I404/MRAM” is displayed between RDY/RP and RUN/IOX alphanumeric

messages.

Table 9 displays the LED alphanumeric messages on a standby PRP-3, if the current active PRP-3 is

reloaded.

Table 9 Dual PRP-3 Scenario

LED Display Description or Console Message

INIT/NV Displays the LED message during the initialization of the NVRAM infra code.

02A8/HW

OK/RIO

LED message displayed immediately after the board is powered on.

OK/CPU

SENT/RPT

Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".

INIT/MEM Displays "Discovering memory in slot DIMM1 ......................... Found 2GB

DIMM

Discovering memory in slot DIMM2 ......................... Found 2GB DIMM"

TEST/MEM Displays "Testing low memory ....................................... OK

Loading main ROMMON image ................................ OK

Verifying loaded image ................................... OK

Load succeeded; launching target ......................... OK"

LNCH/RMON Displays “Cisco ROMMON System Bootstrap, Version 0.16.0 (bld1)

DEVELOPMENT SOFTWARE

Compiled on 08/27/08 at 15:04:49 PDT [BLD-rommon]

MPC8641D platform with 4 GB of main memory"

RDY/RP

PWRD

DISPLAYS "Loading disk0:c12k-os-mbi-3.8.0.15I/mbiprp-rp.vm (14809672

bytes)... !!!"

Tip Instead of RDY/RP, sometimes PWRD is displayed in the normal

booting process.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 87 88

Sin comentarios

Cisco PRP-1= Especificaciones Pagina 27