Cisco SPA3102 Manual de usuario descargar pdf (Pagina 8)

Section 5 – PSTN Line Settings

Click on the “PSTN Line” tab.

The first thing that needs to be changed is under the PSTN Disconnect Detection heading.

The following change is required:

Disconnect Tone: 425@-30,425@-30;1(.375/.375/1+2)

The next thing that needs to be changed is under the International Control heading. The

following changes are required:

FXO Port Impedance: 220+820||120nF

PSTN To SPA Gain: 3

On-Hook Speed: 26ms (Australia)

Everything should now be setup and ready to use. Make sure you press the Submit All Changes

button to save the settings to the SPA-3102.

The Submit All Changes button will save the changes on all pages. You can however hit that

button at the end of each section if you wish to do so.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sin comentarios

Cisco SPA3102 Manual de usuario Pagina 8