Cisco uBR904 Especificaciones descargar pdf (Pagina 14)

Configuration Tasks

Cisco IOS Release 12.0(3)T

When the cable interface comes up, the IP address and downstream channel are conﬁgured

automatically.

Note To conﬁgure multiple PCs, repeat Steps 4 through 7 above for each additional PC. You can

connect a maximum of three PCs to the Cisco uBR904 cable modem in a bridging application.

Verifying Bridging

To verify that routing has been disabled on all interfaces and that bridging has been reenabled, enter the show

startup-conﬁg command from privileged EXEC mode:

uBR904# show startup-config

Building configuration...

Current configuration:

version 12.0

no service pad

no service password-encryption

hostname uBR904

no ip routing

interface Ethernet0

no ip address

no ip route-cache

bridge-group 59

bridge-group 59 spanning-disabled

interface cable-modem0

no ip address

no ip route-cache

no keepalive

cable-modem downstream saved channel 699000000 36

bridge-group 59

bridge-group 59 spanning-disabled

ip classless

line con 0

line vty 0 4

end

uBR904(config-line)#line vty 0 4

Identify the last line in a contiguous group of

virtual terminals you want to conﬁgure.

uBR904(config-line)#Ctrl-z

uBR904#copy running-config startup-config

Building configuration...

Return to privileged EXEC mode.

Save the conﬁguration to nonvolatile RAM so that

it won’t be lost in the event of a reset, power cycle,

or power outage.

Step Command Purpose

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 37 38

Comentarios a estos manuales

Sin comentarios

Cisco uBR904 Especificaciones Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco uBR904