Cisco uBR904 Manual de usuario descargar pdf (Pagina 16)

16 Release Notes for Cisco uBR904 Cable Access Router for Cisco IOS Release 11.3 NA

Related Documentation

• CSCdm30090

When the router is operating as an X.25 switch and forwards an X.25 call containing certain

facilities not interpreted by the router, the facility values can be corrupted. The problem most

likely occurs when the call cannot be forwarded immediately (i.e., when using X25-over-TCP)

with heavy trafﬁc; the affected facilities include any local facilities and the Charging Information

facility.

• CSCdm33448

A router performing X.25 switching may reload when clearing many calls simultaneously during

heavy trafﬁc.

• CSCdm36123

Customer repeatedly crashes (segV) when dialer rotor best is conﬁgured and ’deb dialer’ is

started once the trafﬁc triggers a call.

• CSCdm37153

5200 pri never sends UAf respond to telcos switch in Release 11.3.

• CSCdm37653

Reliable PPP can cause an intermittent crash when used with WFQ. Workaround is to disable

Reliable PPP or WFQ.

• CSCdm38291

The router conﬁgured for dialer watch never dials back when backup interface times out if

Watched route on dialer watch is not installed in routing table.

Related Documentation

The following sections describe related documentation available for the Cisco uBR904 cable access

routers. These documents consist of hardware and software installation guides, Cisco IOS

conﬁguration and command references, system error messages, feature modules, and other

documents.

Documentation is available as printed manuals or electronic documents, except for feature modules,

which are available online on CCO and the Documentation CD-ROM.

Use these release notes with these documents:

• Release-Speciﬁc Documentation, page 17

• Platform-Speciﬁc Documents, page 17

• Feature Modules, page 18

• Cisco IOS Software Documentation Set, page 18

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Cisco uBR904 Manual de usuario Pagina 16