Cisco UBR924 - uBR 924 Router Manual de usuario descargar pdf (Pagina 5)

interface Tunnel0

!−−− Tunnel interface 0

ip address 192.168.20.2 255.255.255.0

!−−− IP address of the gre tunnel interface 0

tunnel source Ethernet0

!−−− IP source of the tunnel. It is best to make this an

!−−− interface with a public, routable IP address so that

!−−− it is reachable from the other endpoint of the tunnel.

tunnel destination 9.9.9.9

!−−− IP destination of the tunnel. Make sure this is

!−−− reachable via the ping command

!−−− Otherwise, the tunnel will not be created properly.

interface Ethernet0

ip address 11.11.11.11 255.255.255.0

ip rip send version 2

!−−− Send RIP version 2 packets.

ip rip receive version 2

!−−− Receive RIP version 2 packets.

no ip route−cache

no ip mroute−cache

interface cable−modem0

ip rip send version 2

!−−− Send RIP version 2 packets.

ip rip receive version 2

!−−− Receive RIP version 2 packets.

no ip route−cache

no ip mroute−cache

no cable−modem compliant bridge

router rip

version 2

passive−interface Tunnel0

!−−− This command is used to avoid recursive routing.

1 2 3 4 5 6 7 8 9 10 ... 14 15

Sin comentarios

Cisco UBR924 - uBR 924 Router Manual de usuario Pagina 5