Cisco WAE-611-K9 Manual de usuario descargar pdf (Pagina 3)

Release Note for Cisco ACNS Software, Release 5.5.7

OL-13139-01

Network Module Support

Software Component Versions Supported in ACNS Software

Table 2 describes which integrated SmartFilter and Websense versions are supported in the ACNS

software releases.

Performance is optimal when Websense Enterprise Manager, the Websense Policy Server, and all other

Websense components are situated in the same LAN. If all components are not in the same LAN, you

might experience communication latency between Websense Enterprise Manager and other components.

A significant increase in latency may lead to a communication failure.

Network Module Support

The ACNS 5.5.7 software provides support for the Cisco NME-WAE-502-K9 network module. The

network module is a standalone Wide Area Application Engine (WAE) that plugs into a host Cisco

access router that runs Cisco IOS software. The ACNS 5.5.7 software, a Linux system-based application,

resides on the network module and has its own startup and run-time configurations that are independent

of the Cisco IOS configuration on the router.

Because the network module does not have an external console port, you must configure the network

module by initiating a Telnet session or by initiating a configuration session from the router CLI. For

more information about configuring the network module, see the Configuring Cisco Access Routers and

NME-WAE Network Modules for ACNS Deployments document.

WAE-512

WAE-612

XXXX

NME-WAE-502-K9 X

Table 1 Hardware and ACNS Software Compatibility Matrix (continued)

ACNS Software Support

Hardware Model 5.3.1 5.3.3 5.3.7 5.4.1 5.4.3 5.5.1 5.5.5 5.5.7

Table 2 Component Versions Supported in ACNS Software Releases

ACNS Software Release SmartFilter Version Supported Websense Version Supported

ACNS 5.2.1 Version 4.0.1 Version 5.2

ACNS 5.3.x Version 4.0.1 Version 5.2

ACNS 5.4.1 Version 4.0.1 Version 5.5.2

1. The integrated Websense Enterprise software Version 5.5 in the ACNS 5.4 software requires a minimum of 512 MB of

RAM. We recommend that you upgrade the RAM on your device to 512 MB or greater, or move your integrated

Websense server to another device that has at least 512 MB of RAM. When additional Websense components are enabled

(such as the Network Agent), the ACNS software requires a minimum of 1 GB of RAM.

ACNS 5.4.3 Version 4.1.1 Version 5.5.2

ACNS 5.5.1 Version 4.0.1 Version 5.5.2

ACNS 5.5.5 Version 4.1.1 Version 5.5.2

ACNS 5.5.7 Version 4.1.1 Version 5.5.2

1 2 3 4 5 6 7 8 ... 27 28

Sin comentarios

Cisco WAE-611-K9 Manual de usuario Pagina 3