Cisco WS-C2916M-XL Manual de usuario descargar pdf (Pagina 12)

Rear-Panel Description

Catalyst 2900 Series XL Installation and Configuration Guide

1-12

Expansion Slot LEDs

The expansion slot LEDs show the status of installed modules. The LEDs are numbered

1 (left slot) and 2 (right slot). Table 1-6 lists the LED colors and their meanings.

Table 1-6 Expansion Slot LEDs

Rear-Panel Description

The rear panels (see Figure 1-8 and Figure 1-9) have an AC power connector, a redundant

power system (RPS) connector, an RJ-45 console port, and fans.

Power Connectors

You can provide power to the switch either by using the internal power supply or by

connecting the Cisco RPS to the RPS connector on the switch.

If you want to use the internal power supply, an autoranging unit supporting input voltages

between 100 and 240 VAC, use the supplied AC power cord to connect the AC power

connector to an AC power outlet.

Warning Attach only the Cisco RPS (model PWR600-AC-RPS) to the RPS

connector.

Console Port

You can connect a Catalyst 2900 series switch to a PC or terminal via the console port and

the supplied rollover cable. For the data characteristics of the console port, see the

“Connecting a Terminal or PC to the Console Port” section on page 3-17.

Color Expansion Slot Status

Off No module is installed.

Green Module is operating normally.

Amber Module failed POST and should be replaced.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Cisco WS-C2916M-XL Manual de usuario Pagina 12