
• IEEE 802.1D Spanning-Tree Protocol support for redundant
backbone connections and loop-free networks simplifies network
configuration and improves fault tolerance
• Support for a redundant loopback cable connecting the top and
bottom switches in a GigaStack stack
• Support for optional Cisco 600-watt redundant AC power
system provides a backup power source for up to four units for
improved fault tolerance and network uptime
Technical Specifications
Performance
• 10.8-Gbps switching fabric
• 4.8 Mpps wire-speed forwarding rate for 64-byte packets
(Catalyst 3512 XL), 6.5 million pps wire-speed forwarding rate
for 64-byte packets (Catalyst 3524 XL), 8.0 Mpps forwarding
rate for 64-byte packets (Catalyst 3548 XL)
• 5.4-Gbps maximum forwarding bandwidth
• 4 MB memory architecture shared by all ports
• 8 MB DRAM (Catalyst 3512 XL and 3524 XL) and 4 MB Flash
memory
• 16 MB DRAM (Catalyst 3548 XL) and 4 MB Flash memory
• 8192 MAC addresses
Management
• SNMP Management Information Base (MIB) II, SNMP MIB
extensions, Bridging MIB (RFC 1493)
Standards
• IEEE 802.3x full duplex on 10BaseT, 100BaseTX, and
1000BaseX ports
• IEEE 802.1D Spanning-Tree Protocol
• IEEE 802.1p CoS Prioritization
• IEEE 802.1Q VLAN
• IEEE 802.3z 1000BaseX specification
• 1000BaseX (GBIC)
– 1000BaseSX
– 1000BaseLX/LH
– 1000BaseZX
• IEEE 802.3u 100BaseTX specification
• IEEE 802.3 10BaseT specification
Y2K
• Y2K compliant
Connectors and Cabling
• 10BaseT ports: RJ-45 connectors; two-pair category 3, 4, or 5
unshielded twisted-pair (UTP) cabling
• 100BaseTX ports: RJ-45 connectors; two-pair Category 5 UTP
cabling
• 1000BaseX GBIC ports: SC fiber connectors, single mode or
multimode fiber
• GigaStack GBIC ports: copper-based Cisco GigaStack cabling
• Management console port: RJ-45 connector, RS-232 serial
cabling
Indicators
• Per-port status LEDs—link integrity, disabled, activity, speed,
and full-duplex indications
• System status LEDs—system, RPS, and bandwidth utilization
indications
Dimensions and Weight (H x W x D)
• 1.75 x 17.5 x 11.8 in (4.4 x 44.5 x 30 cm) (Catalyst 3512 XL
and 3524 XL)
• 1.75 x 17.5 x 15.3 in (4.4 x 44.5 x 39 cm) (Catalyst 3548 XL)
• One rack-unit (RU) high
• 10.25 lb (4.6 kg) (Catalyst 3512 XL and 3524 XL)
• 11 lb (5.01 kg) (Catalyst 3548 XL)
Environmental Conditions and Power Requirements
• Operating temperature: 32 to 113 F (0 to 45 C)
• Storage temperature: –13 to 158 F (–25 to 70 C)
• Operating relative humidity: 10 to 85% noncondensing
• Operating altitude: Up to 10,000 ft (3000 m)
• Power consumption: 70W maximum (Catalyst 3512 XL and
3524 XL); 100W maximum (Catalyst 3548 XL); 239 BTU per
hour
• AC input voltage/frequency: 100 to 120/200 to 240 VAC
(autoranging) 50 to 60 Hz
• MTBF 150,000 hours (Catayst 3512 and 3524 XL)
• MTBF 135,000 hours (Catalyst 3548 XL)
Safety Certifications
• UL 1950
• CSA 22.2 No. 950
• EN 60950
• IEC 950
• AS/NZS 3260, TS001
• CE Marking
• TUV
Electromagnetic Emissions Certifications
• FCC Part 15 Class A
• EN 55022b Class A (CISPR 22 Class A)
• VCCI Class A
Comentarios a estos manuales