Cisco PIX-515-RPS - PIX 515-R - Firewall Manual de usuario descargar pdf (Pagina 2)

Cisco PIX Security Appliance Release Notes Version 7.2

OL-10104-01

System Requirements

Additionally, the security appliance software supports ASDM. ASDM is a browser-based, Java applet

used to configure and monitor the software on the security appliances. ASDM is loaded from the security

appliance, then used to configure, monitor, and manage the device.

System Requirements

The sections that follow list the system requirements for operating a security appliance.

Note The PIX 501, PIX 506/506E, and PIX 520 security appliances are not supported in software

Version 7.2(1).

Memory Requirements

If you are using a PIX 515/515E running PIX Version 6.2/6.3, you need to upgrade your memory before

performing an upgrade to PIX Version 7.0. PIX Version 7.0 requires at least 64 MB of RAM for

Restricted (R) licenses and 128 MB of RAM for Unrestricted (UR) and Failover (FO) licenses. The following

security appliance platforms require at least 64 MB of RAM. Table 1 lists Flash memory requirements

for Version 7.2(1).

For more information on minimum memory requirements, see “Minimum Memory Requirements”

section in the Guide for Cisco PIX 6.2 and 6.3 Users Upgrading to Cisco PIX Software Version 7.0.

Software Requirements

Version 7.2(1) requires the following:

1. The minimum software version required before performing an upgrade to PIX Version 7.(2)1 is

PIX Version 7.0. If you are running a PIX version prior to PIX Version 6.2, you must first upgrade

to PIX Version 6.2 or PIX Version 6.3 before you can begin the upgrade to PIX Version 7.0.

To upgrade your PIX software image, go to the following website:

http://www.cisco.com/public/sw-center/index.shtml

2. For information on specific licenses supported on each model of the security appliance, go to the

following websites:

http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html

3. If you are upgrading from a previous PIX version, save your configuration and write down your

activation key and serial number. See http://www.cisco.com/public/sw-center/index.shtml for new

installation requirements.

Table 1 Flash Memory Requirements

Security Appliance Model Flash Memory Required in Version 7.2(1)

PIX 515/515E 16 MB

PIX 525 16 MB

PIX 535 16 MB

1 2 3 4 5 6 7 ... 27 28

Sin comentarios

Cisco PIX-515-RPS - PIX 515-R - Firewall Manual de usuario Pagina 2