Cisco Router IOS XR Manual de usuario descargar pdf (Pagina 99)

Cisco IOS XR Training Page 99

RP/0/RSP0/CPU0:PE2(config)#l2vpn

RP/0/RSP0/CPU0:PE2(config-l2vpn)#xconnect group R3R4

RP/0/RSP0/CPU0:PE2(config-l2vpn-xc)#p2p R3_to_R4

RP/0/RSP0/CPU0:PE2(config-l2vpn-xc-p2p)#interface g0/1/0/19

The Pseudo-wire ID must match.

RP/0/RSP0/CPU0:PE2(config-l2vpn-xc-p2p)#neighbor 150.1.1.1 pw-id 304

RP/0/RSP0/CPU0:PE2(config-l2vpn-xc-p2p-pw)#comm

RP/0/RSP0/CPU0:PE2(config-if)#int g0/1/0/19

RP/0/RSP0/CPU0:PE2(config-if)#spee 100

RP/0/RSP0/CPU0:PE2(config-if)#comm

Now we can look at our L2VPN Cross-connects

RP/0/RSP0/CPU0:PE1#sh l2vpn xconnect

Tue Apr 24 03:40:36.619 UTC

Legend: ST = State, UP = Up, DN = Down, AD = Admin Down, UR = Unresolved,

SB = Standby, SR = Standby Ready

XConnect Segment 1 Segment 2

Group Name ST Description ST Description ST

--------------------- ------------------ -------------------------

R3R4 R3_to_R4 UP Gi0/1/0/19 UP 150.2.2.2 304 UP

----------------------------------------------------------------------

RP/0/RSP0/CPU0:PE1#

There you go, that looks good. Now, can we PING between CE1 and CE2?

CE1#p 10.1.34.4

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 10.1.34.4, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms

Yup, PING works. Hmm, wonder what CDP looks like?

CE1#sh cdp nei

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge

S - Switch, H - Host, I - IGMP, r - Repeater

Device ID Local Intrfce Holdtme Capability Platform Port ID

CE2 Fas 0/0 160 R S I 2811 Fas 0/0

CE1#

Now if we look at OSPF:

CE1#sh ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 105

Sin comentarios

Cisco Router IOS XR Manual de usuario Pagina 99