Cisco UCS-SPR-C220-V1 Especificaciones descargar pdf (Pagina 65)

3-25

Cisco UCS C220 Server Installation and Service Guide

OL-25760-01

Chapter 3 Maintaining the Server

Installing or Replacing Server Components

Figure 3-13 CPU Heatsink and Socket

Step 2 Remove a protective cap or an old CPU from the socket (if present):

• If you are removing an old CPU, skip to Step 3.

• If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap

that is intended to prevent bent contact pins. Use the tool as shown in

Figure 3-14 to grasp the

protective cap and then pivot to remove the cap.

Figure 3-14 Protective Cap Removal Tool

Step 3 Remove an old CPU:

a. Set the Pick-and-Place tool on the CPU in the socket, aligning the arrow on the tool with the

registration mark on the socket (the small triangular mark). See

Figure 3-15.

b. Press the top button on the tool to grasp the installed CPU.

c. Lift the tool and CPU straight up.

1 CPU retaining latch, 3 Hinged CPU cover plate

2 CPU retaining latch, –

332093

333565

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 133 134

Sin comentarios

Cisco UCS-SPR-C220-V1 Especificaciones Pagina 65