Cisco ME 3400 Especificaciones descargar pdf (Pagina 545)

100

101

2-519

Cisco ME 3400 Ethernet Access Switch Command Reference

OL-9640-07

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show storm-control

This is an example of output from the show storm-control command for a specified interface. Because

no traffic-type keyword was entered, the broadcast storm control settings appear.

Switch> show storm-control gigabitethernet 0/1

Interface Filter State Upper Lower Current

--------- ------------- ---------- --------- ---------

Gi0/1 Forwarding 20 pps 10 pps 5 pps

Table 2-19 describes the fields in the show storm-control display.

Related Commands

Ta b l e 2-19 show storm-control Field Descriptions

Field Description

Interface Displays the ID of the interface.

Filter State Displays the status of the filter:

• Blocking—Storm control is enabled, and a storm has occurred.

• Forwarding—Storm control is enabled, and no storms have occurred.

• Inactive—Storm control is disabled.

Upper Displays the rising suppression level as a percentage of total available

bandwidth in packets per second or in bits per second.

Lower Displays the falling suppression level as a percentage of total available

bandwidth in packets per second or in bits per second.

Current Displays the bandwidth usage of broadcast traffic or the specified traffic type

(broadcast, multicast, or unicast) as a percentage of total available

bandwidth. This field is only valid when storm control is enabled.

Command Description

storm-control Sets the broadcast, multicast, or unicast storm control levels for the switch.

1 2 ... 540 541 542 543 544 545 546 547 548 549 550 ... 871 872

Comentarios a estos manuales

Sin comentarios

Cisco ME 3400 Especificaciones Pagina 545

Comentarios a estos manuales

Relacionado con productos y manuales para Software Cisco ME 3400