Cisco AIR-CAP1702I-EK910 Especificaciones descargar pdf (Pagina 16)

Using DHCP Option 43

You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling

them to find and join a controller. For additional information, refer to the “Configuring DHCP Option

43 and DHCP Option 60” section on page 37.

Checking the Access Point LED

The location of the access point status LED is shown in Figure 1.

Note Regarding LED status colors, it is expected that there will be small variations in color intensity

and hue from unit to unit. This is within the normal range of the LED manufacturer’s

specifications and is not a defect.

The access point status LED indicates various conditions and are described in Table 1.

Table 1 LED Status Indications

Message

Type

Status

LED

Message

Meaning

Boot loader status

sequence

Blinking green DRAM memory test in progress

DRAM memory test OK

Board initialization in progress

Initializing FLASH file system

FLASH memory test OK

Initializing Ethernet

Ethernet OK

Starting Cisco IOS

Initialization successful

Association status Chirping Green Normal operating condition, but no wireless

client associated

Green Normal operating condition, at least one wireless

client association

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sin comentarios

Cisco AIR-CAP1702I-EK910 Especificaciones Pagina 16