Cisco Multiband Swivel-Mount Dipole Antenna AIR-ANTM2050D-R Guía de instalación descargar pdf (Pagina 20)

1-6

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-04

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-6 shows the back panel details of the Cisco 888W data router. Nonwireless routers do not have

antennas on the back panel. However, the feature locations are similar across all Cisco 880 series data

routers.

Figure 1-6 Back Panel of the Cisco 888W Data Router

2. Ports 0 and 1 provide PoE with the optional PoE module installed.

Caution The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN

port may occur if a non RJ-45 connector is inserted.

231951

1 4 5 6 8 9 1072 3

1 ISDN port—not available on 3G models 6 PoE power connector for optional PoE

module

2 Primary WAN port

—G.SHDSL,

VDSLoPOTS, ADSLoPOTS, ADSLoISDN,

or 10/100 FE

7 Reset button

3 Antenna—captive omnidirectional dipole

WLAN antenna (wireless models only)

8 Power connector

4 4-port 10/100 Ethernet switch 9 Earth ground connection

5 Serial port—console or auxiliary 10 Kensington security slot

1. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected

to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install it to enable the

PoE function.

2. Depending on the router model, the primary WAN port can be G.SHDSL, VDSLoPOTS, or 10/100 FE. The VDSLoPOTS

port is in the same location as the G.SHDSL port. The 10/100 FE WAN port is located at the bottom left corner. See Figure 1-2

for the location of the 10/100 FE WAN port.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Sin comentarios

Cisco Multiband Swivel-Mount Dipole Antenna AIR-ANTM2050D-R Guía de instalación Pagina 20