Cisco ASA5500-HW - Hardware Accessory Kit Network Device Guía de instalación Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 82
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
A-11
Cisco ASA 5500 Series Hardware Installation Guide
78-17374-01
Appendix A Installing and Replacing the SSM
Installing and Replacing the SSM
Step 6 Attach the screws to secure the SSM to the chassis.
Step 7 Enter the hw-mod mod 1 reset command in privileged EXEC mode to reset the SSM.
Step 8 Check the LEDs. If the SSM is installed properly, the POWER LED is solid green and the STATUS LED
flashes green.
Step 9 Connect one end of the RJ-45 cable to the port and the other end of the cable to your network devices. For
more information, see Figure 3-15.
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 81 82

Comentarios a estos manuales

Sin comentarios